DeckTown > Titebond® Subfloor Adhesive
Titebond® Subfloor Adhesive
$9.99
TITEBOND SUBFLOOR CONSTRUCTION ADHESIVE
Titebond Solvent-Based Subfloor Construction Adhesive is a professional strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and prevents squeaky floors. It offers a strong initial tack and excellent bond strength. It is covered under the 25 Year Silver Subfloor Warranty against subfloor squeaks and pops.
Features & Benefits
- Recommended For: Subfloor installations, general plywood use, as well as filling gaps and irregularities in the subfloor.
- Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19
- Compatible Materials: Common building materials including wood, engineered lumber, particleboard, OSB and wet, frozen and treated lumber.
- Industry’s best subfloor warranty
- Solvent-based
- Prevents squeaks
- Works extremely well in cooler temperatures
- Increases floor rigidity
- Ideal for plywood, particleboard and OSB
- Wet & frozen lumberFills irregularities between materials to provide a more solid backup surface
Application Guidelines
- Application Temperature:
- 0°F to 100°F
- Service Temperature Range:
- -20°F to 120°F
- Working Time:
- Approximately 10-20 minutes for a 1/4" bead
- Prep:
- Surfaces must be clean and free of any material that may prevent adequate adhesion.
- Application:
- Cut tip straight across for 3/8'' to 1/2'' bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
- Cleanup:
- Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
- Limitations:
- Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.
Brand |
---|
TITEBOND SUBFLOOR CONSTRUCTION ADHESIVE
Titebond Solvent-Based Subfloor Construction Adhesive is a professional strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and prevents squeaky floors. It offers a strong initial tack and excellent bond strength. It is covered under the 25 Year Silver Subfloor Warranty against subfloor squeaks and pops.
Features & Benefits
- Recommended For: Subfloor installations, general plywood use, as well as filling gaps and irregularities in the subfloor.
- Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19
- Compatible Materials: Common building materials including wood, engineered lumber, particleboard, OSB and wet, frozen and treated lumber.
- Industry’s best subfloor warranty
- Solvent-based
- Prevents squeaks
- Works extremely well in cooler temperatures
- Increases floor rigidity
- Ideal for plywood, particleboard and OSB
- Wet & frozen lumberFills irregularities between materials to provide a more solid backup surface
Application Guidelines
- Application Temperature:
- 0°F to 100°F
- Service Temperature Range:
- -20°F to 120°F
- Working Time:
- Approximately 10-20 minutes for a 1/4" bead
- Prep:
- Surfaces must be clean and free of any material that may prevent adequate adhesion.
- Application:
- Cut tip straight across for 3/8'' to 1/2'' bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
- Cleanup:
- Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
- Limitations:
- Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.
Brand |
---|
TITEBOND SUBFLOOR CONSTRUCTION ADHESIVE
Titebond Solvent-Based Subfloor Construction Adhesive is a professional strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and prevents squeaky floors. It offers a strong initial tack and excellent bond strength. It is covered under the 25 Year Silver Subfloor Warranty against subfloor squeaks and pops.
Features & Benefits
- Recommended For: Subfloor installations, general plywood use, as well as filling gaps and irregularities in the subfloor.
- Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19
- Compatible Materials: Common building materials including wood, engineered lumber, particleboard, OSB and wet, frozen and treated lumber.
- Industry’s best subfloor warranty
- Solvent-based
- Prevents squeaks
- Works extremely well in cooler temperatures
- Increases floor rigidity
- Ideal for plywood, particleboard and OSB
- Wet & frozen lumberFills irregularities between materials to provide a more solid backup surface
Application Guidelines
- Application Temperature:
- 0°F to 100°F
- Service Temperature Range:
- -20°F to 120°F
- Working Time:
- Approximately 10-20 minutes for a 1/4" bead
- Prep:
- Surfaces must be clean and free of any material that may prevent adequate adhesion.
- Application:
- Cut tip straight across for 3/8'' to 1/2'' bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
- Cleanup:
- Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
- Limitations:
- Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.
Brand |
---|
Ask a Question or Get a Quote
You may also like...
You may also like…
Albert Floorotex
40" x 45'
$67.00$60.30 Select optionsAlbert Floorotex
40" x 45'
$$$60.3000Add to cartConstruction Board
38" x 100'
$75.47$67.92 Select optionsConstruction Board
38" x 100'
$$$67.9200Add to cart