November 24, 2023
Which Type of Moulding is Suitable for your Project?
When selecting Interior Mouldings & Trim for your finishing project, it helps to narrow down your selection based on where in your room your moulding or trim is going. If you’re wondering what moulding or trim to use, there are no rules, but here is a little bit about each type and where you typically find them.
CASINGS—Door and Window Trim
If you are replacing the trim around your doors and windows there are plenty of casing options available to choose from. A casing profile is eased slightly on both edges for aesthetic appeal. Casing varies in size, generally between 3/8” and ¾” in thickness and 2” to 3-1/2” in width, but there are exceptions.
ARCHITRAVE—Door and Window Header
Architrave can be used at the top of windows and doors to achieve a specific look. Door and Window Header material is available in prefabricated moulding profiles, and can also be custom-made using a combination of trims such as flat stock, crown/cornice moulding, and panel moulding. It’s up to you!
BASEBOARDS—Floor Trim
The floor trim, or baseboard has only one eased edge – the top of the profile, so the bottom sits flush on the floor offering a clean finish. Ideally, the casing and baseboards are updated at the same time and have similar profiles, but the choice is ultimately up to you on how you want your baseboards to look. In general, a baseboard is thinner and taller than the casing, to give the most desirable finished look. You can find baseboards in a wide range of sizes – we have up to 7-1/4” tall in stock, and have supplied even taller!
CORNICE/CROWN—Ceiling Trim
If you plan to add some detail moulding to the top of a wall, where it meets the ceiling, Cornice is the best choice. Cornice is available in a variety of widths, so choose one that suits the size of the room.
In larger rooms with high ceilings, using a wide profile is recommended. Cornice moulding can also be used when making custom door and window header.
Other mouldings that are commonly used in DIY Interior Finishing projects include: Flat Stock, Cove Moulding, Quarter, Half or Full Round, Panel Moulding, Corner Moulding, Screen Moulding, Sill, Stop, and many others. If you require mouldings for your Interior Finishing Project, we can find it for you!
Latest Blogs
What to Consider when Starting your DIY Deck Project
With summer just around the corner, are you looking at your old deck thinking I could replace this myself ?…
How to Choose Between Interior Hollow-Core Doors and Solid-Core Doors?
At first glance, it may seem like an easy choice to decide between solid doors, solid-core doors, and hollow doors.…
Best Floor for a Pet
Do you have a pet, or are thinking of getting one? Are you wondering what flooring choice is the best…